Introduzione
Questa procedura è rivolta ai service provider/partner che vogliono attivare il servizio per se o per i propri clienti.
Di seguito i semplici passaggi di attivazione del servizio VPN su Public Cloud
Prerequisiti
Per realizzare la VPN occorre avere accesso al Firewall Cisco ASA in modalità "Privileged EXEC"
Guida passo-passo
Configurazione Cisco ASA
ciscoasa> ena Password: ********** ciscoasa# ciscoasa# conf t ciscoasa(config)# ! Inserire la Configurazione !
Configurazione
object network NET_LOCAL subnet $Local Subnet es: 192.168.52.0 255.255.255.0 object-group network NET_CLOUD network-object $Remote Subnet es: 192.168.168.0 255.255.255.0 access-list VPN-CLOUD extended permit ip object NET_LOCAL object-group NET_CLOUD nat (inside,Outside) source static NET_LOCAL NET_LOCAL destination static NET_CLOUD NET_CLOUD no-proxy-arp route-lookup crypto ipsec ikev1 transform-set esp-aes256-sha esp-aes-256 esp-sha-hmac crypto ipsec security-association pmtu-aging infinite crypto ipsec df-bit clear-df Outside crypto map CLOUD_MAP 10 match address VPN-CLOUD crypto map CLOUD_MAP 10 set pfs crypto map CLOUD_MAP 10 set peer $CLOUD IPv4 Address es: 185.132.70.13 crypto map CLOUD_MAP 10 set ikev1 transform-set esp-aes256-sha crypto map CLOUD_MAP 10 set security-association lifetime seconds 86400 crypto map CLOUD_MAP interface Outside crypto isakmp identity address crypto ikev1 enable Outside crypto ikev1 policy 10 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400
NOTE:
$Local Subnet = rete/i locale/i
$Remote Subnet = rete/i remota/e
Configurazione testata con Cisco Adaptive Security Appliance Software Version 9.1(4)
Sommario
Articoli collegati
Filter by label
There are no items with the selected labels at this time.